Emulsion for Pressure Sensitive Adhesive
POLYSOL and VINYLOL are product lineup of pressure sensitive adhesive for both eco-friendly emulsion type and good workable solvent type. We can supply a variety of pressure sensitive adhesive products can satisfy customer’s requirements, such as adhesive at high temperature, adhesiveness at low temperature, strong adhesion on curved surface, removability and hardenable adhesion polyolefin.
Product List by Adhesion Type
We offer both water based emulsion POLYSOL and solvent based emulsion VINYLOL.
Strong Adhesion - POLYSOL (water based)
Water based emulsion pressure sensitive adhesive (POLYSOL)
| Products | Main ingredients | Solid Content (%) | Viscocity (mPa・s/23°C) | pH | Ball tack | Holding power | Characteristics |
| PSA SE-1300N | Acrylic ester polymer | 49.0 | 50> | 10.0 | 7 | 24< | Strong adhesion, low viscosity |
| PSA SE-1720 | Acrylic ester polymer | 51.0 | 14,000 | 8.0 | 3 | 24<N.C | Transparency, water resistance (does not whiten) |
| PSA SE-4210E | Acrylic ester polymer | 60.0 | 4,500 | 7.5 | 11 | 24<N.C | Adhesive strength for wet surface with dew, adhesiveness on polyolefin |
| PSA SE-4500 | Acrylic ester polymer | 59.0 | 13,000 | 8.0 | 10 | 24<N.C | Low VOC, high holding power, adhesiveness on polyolefin |
| PSA SE-6010 | Vinyl acetate-acrylic ester copolymer | 65.0 | 12,500 | 6.0 | 5 | 24<N.C | Heat resistant peel force, adhesiveness on polyolefin |
| PSA SE-6210L | Vinyl acetate-acrylic ester copolymer | 60.0 | 5,000 | 5.0 | 9 | 24<N.C | Heat resistant holding power, adhesiveness at low temperature |
C: cohesion failure
NC：Non-creep
Curing formulation: SE-1004E/SU-125Z=100/0.8
For weak adhension, woodfree paper of 55g/m2 is used as support.
Weak Adhesion - POLYSOL (water based)
Water based emulsion for pressure sensitive adhesive (POLYSOL)
| Products | Main ingredients | Solid Content (%) | Viscocity (mPa・s/23°C) | pH | Ball tack | Holding power | Characteristics |
| PSA SE-1004E | Acrylic ester polymer | 53.0 | 10,000 | 8.0 | 9 | 24<N.C | Removability, transcription coating is possible |
C: cohesion failure
NC：Non-creep
Curing formulation: SE-1004E/SU-125Z=100/0.8
For weak adhension, woodfree paper of 55g/m2 is used as support.
Hardenable Adhesion - POLYSOL (water based)
Water based emulsion for pressure sensitive adhesive (POLYSOL)
| Products | Main ingredients | Solid Content (%) | Viscocity (mPa・s/23°C) | pH | Ball tack | Holding power | Characteristics |
| PSA SE-8001 | Modified acrylic ester polymer | 58.0 | 7,000 | 6.0 | – | – | High initial adhesion, for polyolefin |
C: cohesion failure
NC：Non-creep
Curing formulation: SE-1004E/SU-125Z=100/0.8
For weak adhension, woodfree paper of 55g/m2 is used as support.